S/Pdif Input And Output; Switch/Pedal; Midi - Kemper Profiler Main Manual

Back Panel Overview Stage 61

S/PDIF INPUT and OUTPUT (7)

This is a digital input and output that can be used to connect the PROFILER to other S/PDIF compatible devices,
such as certain computers and audio interfaces. Details related to connection and configuration can be found in the
chapter Reamping.

SWITCH/PEDAL (8)

You can connect expression pedals and momentary switches to control several functions. Details about technical
conditions, cabling, and set-up of pedals and switches can be found in the dedicated chapter Expression Pedals and
Foot Switches and in tutorial videos on: www.kemper-amps.com/video

MIDI (9)

Use these ports to connect the PROFILER to MIDI equipment. You can send MIDI program changes to the MIDI
INPUT to switch between Rigs, and MIDI control changes to switch and control effects. If you send MIDI clock to the
PROFILER, it will instantly sync its tempo, so that any tempo-dependent effects, like delay or tremolo, will adapt their
timing accordingly. Details about MIDI can be found in a dedicated chapter MIDI.