Rigs And Signal Chain - Kemper Profiler Main Manual

Rigs and Signal Chain 20

Rigs and Signal Chain
A Rig and its signal chain
A complete signal chain comprising amplifier, guitar cabinet and potentially multiple effects is called a "Rig".
The signal chain of any Rig begins at the Guitar Input, passes through four effects modules, the stack section, and
then followed by another four effects modules. From there, the signal is sent to the outputs. The sequence of the
TM
modules and sections from left to right represents the signal flow inside the PROFILER and is reflected by the
corresponding controls on the upper row of the front panel.
Each of the buttons in the signal flow provides a unique and intuitive way to manage your sound. By pressing a
corresponding button, you activate that module or section. Hold the button a little bit longer to focus the module and
show its parameters in the display. The lower line of the display shows up to four parameters that can be controlled
by the soft knobs underneath. Tweak the soft knobs to change your sound. If the module offers more than four
parameters, you can move between pages using the PAGE buttons. To return to the home screen, press EXIT.