Creating Backups; Restoring Backups - Kemper Profiler Main Manual

✓
Usually, you can update to the latest operating system in one step. However, if the operating system currently
installed on your PROFILER should happen to be older than 1.8.2 Release, you need to take an interim step, and
upgrade to that operating system version first. Leaving this step out might lead to an error.

Creating Backups

We recommend backing up your Rigs, presets, Performances, and global settings on a regular basis. This can only
be done via USB-stick and not via Rig Manager! To do so, please plug the prepared USB stick into your PROFILER,
switch into Browse or Performance Mode, hit soft button labeled "USB Stick" and chose the "Backup/Restore" option.
The backup archive will contain all your Rigs, Performances, module and section presets,
Snapshots, and global settings. If an older backup is already present on your USB stick, it will not be deleted. Each
backup archive is given a unique name. To backup, select the soft button labeled "Backup" and wait until you're
notified that the backup has been completed. This procedure can take several minutes. Never remove the USB stick
until you're prompted to do so. All successful backups can be found inside a folder called "Backups" on your USB
stick.
✓
PROFILER backups include all settings related to the PROFILER Remote.

Restoring Backups

This option restores a backup from your USB stick to the PROFILER. If multiple backups are detected, you will be
asked to select one from the list. Note that restoring a backup will replace all Rigs, Performances, module and
section presets, MIDI assignments, Snapshots and global settings.
✓
Backups are generally interchangeable between PROFILER variants including the Stage. If you intend to restore a
backup of the Stage on any other PROFILER model, that PROFILER should at least run OS 7.0. Pedal
Updates, Backups and Sharing Sounds 283
MIDI assignments,