Up/Down Buttons; Rig Buttons; Tap Button - Kemper Profiler Main Manual

Up/Down Buttons (1)

In Performance Mode, use these buttons to navigate through your Performances. A short tap will step up or down to
the next Performance. Holding will initiate scrolling. Depending on the status of the parameter
the System Settings, the PROFILER will either load Slot 1 or the current Slot of the selected Performance
immediately, or wait ("Pending") until you hit one of the five
In Browser Mode, you can step or scroll through Rigs in your browse pool according to the selected
criteria. The option "Group of 5/Single Rig" on page
Order
Up/Down Buttons step through the Rigs individually or by groups of five in Browser Mode.
✓
The function of the Up/Down Buttons can be changed on the "Remote Buttons" page in System Settings, reached
via "Button Assignment" on the
✓
Users of the PROFILER Stage can find identical settings on the

Rig Buttons 1-5 (2)

These are the buttons for selecting Slots in Performance Mode, and Rigs in Browser Mode. Subsequent hits of these
buttons trigger Morphing.

TAP Button (3)

This button triggers the Tap
models. Tap in quarter notes to adjust the tempo of delay, phaser, flanger, and tremolo effects. The LED will blink to
indicate the current tempo. Holding this button while you play to activate the marvelous
Remote Settings page.
Tempo, just like the TAP button
Rig Buttons.
Remote Settings in System Settings determines, if the
User Interface 2 page in System Settings.
on the front panel of the PROFILER Head and Rack
PROFILER Remote 252
"Performance Load" in
View and Sort
Beat Scanner, which