Undo And Redo Buttons; Exit Button; Page> Buttons - Kemper Profiler Main Manual

Front Panel Controls Head, PowerHead, Rack, and PowerRack 36
Pressing Store in Browser Mode will offer you three different options via the soft buttons: "Replace" will overwrite the
currently selected Rig with the new version while keeping the original name, "Store as" will save the Rig under a new
name and won't delete the original Rig. "Rename" will allow you to change the name of the current Rig.
If you press the STORE button with a module or section in focus, you have the option to either save a preset of that
specific module or section, or to save the entire Rig. If you decide to store a preset you will have the same options to
"Replace", "Store as", or "Rename".
Your preset can later be found and reloaded by turning the BROWSE knob with a module or section in focus.

UNDO and REDO Buttons (19)

With the UNDO and REDO buttons you can revise, or step back-and-forth through any modifications you have made
to the settings within the current Rig.

EXIT Button (20)

Press this to return to the home screen.
<PAGE> Buttons (21)
If there is more than one page within a particular module, you can use these buttons to switch between them.