Connecting Pedals To Profiler Remote Or Profiler Stage - Kemper Profiler Main Manual

Connecting Pedals to PROFILER Remote or PROFILER Stage

Both PROFILER Remote and PROFILER Stage feature four inputs for the direct connection of expression pedals or
switches. For the Remote, these can be configured in System Settings on the
Stage, these can be configured in the Pedals Settings on the "Pedal 1-4" pages, which can be opened with its
PEDALS button.
The four PEDAL inputs of the PROFILER Remote
•
PEDAL 3: Volume
•
PEDAL 4: Morph
•
PEDAL 5: Wah
•
PEDAL 6: Pitch
The four PEDAL inputs of the PROFILER Stage
•
PEDAL 1: Volume
•
PEDAL 2: Morph
•
PEDAL 3: Wah
•
PEDAL 4: Pitch
"Pedal Type 1" is also preselected, which fits nearly all regular expression pedals. If you are using an expression
pedal with reversed polarity (e.g. Yamaha™), please select "Pedal Type 2". Wrong polarity could cause a sub-
optimal response curve.
Expression Pedals and Foot Switches 129
are already preassigned to the following functions:
are preassigned in a similar way:
"Pedal
3-6" pages. For PROFILER