Stack Section - Kemper Profiler Main Manual

Stack Section

In the middle of this signal flow, you will find the stack section with the buttons for AMPLIFIER and CABINET. The
stack section represents the raw, virtual guitar amplifier and cabinet, as defined by the PROFILE
All the powerful possibilities to further fine-tune Profiles are explained in a dedicated chapter about the
In the stack section, you can freely combine amps and cabinets. Hold their respective buttons to bring them into
focus. Then use the BROWSE knob
select soft button labeled "Presets", to browse through the list of amplifier or cabinet presets stored on your
•
PROFILER,
or select soft button labeled "From Rigs", to load an amplifier or cabinet from another Rig in the browse pool of your
•
PROFILER.
While the stack section is in focus, you have the same choice of either selecting stack presets or loading stacks from
other Rigs.
As with effect presets, the presets in the amplifier, cabinet modules and the stack section are also user data that you
can save with a relevant name or delete as you see fit. The PROFILER ships with several examples onboard. If you
have a favorite Amplifier PROFILE with settings that you like, and want to reuse later, storing it as a preset could
prove very useful.
to either:
Rigs and Signal Chain 25
TM
.
stack section.