Easy Reverb; Echo Reverb - Kemper Profiler Main Manual

Easy Reverb

The Easy Reverb is based on the Natural Reverb. In contrast to the latter, the number of parameters is reduced to a
minimum, to make the workflow easy and straightforward.

Decay Time
In the Easy Reverb, the Decay Time also controls the hidden parameters Room Size and Predelay time. This is
done in a smart way, automatically creating a natural room sound to match the chosen Decay Time. This
simplification will take away some degree of freedom, but by controlling all three parameters with just one knob you
are relieved of the burden of bringing all three parameters to an authentic balance.

Echo Reverb

The Echo Reverb is a delay combined with a reverb. In other words: a Natural Reverb with a feedback control added
to its predelay to create rhythmic repetitions of the reverb tail. So, instead of using a straight delay type for a
rhythmic enhancement, use the Echo Reverb for diffuse and soft echo reflections, when you find a regular delay is
sounding too concrete or direct for your needs.
There are only three differences that separate the Echo Reverb from the Natural Reverb:
The parameter "Predelay Feedback" is added. The higher the value, the more repetitions.
•
•
The range for the Predelay is expanded to 2000 milliseconds, similar to the delay effects. However, for rhythmic
echoes it is more fun to hit the "To Tempo" button and use Note Values and Tap Tempo to set the desired repetition
time.
The Room Size parameter is not available — it is set to minimum internally because it is assumed that you will use
•
fairly short rooms for your Echo Reverb.
Reverb (Green) 226