More Assignments; Toggling Effects; Storing Assignments; Assignments Without Remote - Kemper Profiler Main Manual

PROFILER Remote 255

More Assignments

Even more effect modules can be assigned to the same Effect Button this way. However, the LEDs will only show
the first two assignments.

Toggling Effects

The Effect Buttons toggle the on/off states of each of their assigned effect modules independently, depending on
their current state. So, not only can you activate (or bypass) multiple effects simultaneously - you can also activate
some effect modules while bypassing others. The white LEDs will reflect this accordingly.
Example: Currently, effect module D is activated, and module X is bypassed. Both effect modules are assigned to
the same Effect Button. If you hit this Effect Button, module D will be bypassed, and module X will be activated. This
allows you to toggle between different effect scenes.

Storing Assignments

Once you are happy with the assignments and the current on/off states, then simply store the Rig. All assignments
that you have created are stored with the individual Rig. Whenever you load this Rig later, the assignments and the
on/off states are recalled just as they were when you stored the Rig.

Assignments without Remote

If your PROFILER Remote is not connected, or if your stage is so huge that your PROFILER is miles away from the
Remote, you will not be able to reach both at the same time. In this case, enter the Remote Effect Buttons page in
Rig Settings, hold one of the four soft buttons, and press one or more effect module buttons to complete the
assignment.