Rig Navigation Cross; Headphone Output; Gain Knob; Rig Volume Knob - Kemper Profiler Main Manual

Front Panel Controls Head, PowerHead, Rack, and PowerRack 37

RIG Navigation Cross (22)

Use this to navigate through the Rigs. Left and right buttons will switch sequentially, while the up and down buttons
will change in larger steps. A newly selected Rig is instantly recalled.

HEADPHONE Output (23)

Plug in your ¼ inch stereo headphones jack.

GAIN Knob (24)

The GAIN knob controls the amount of distortion and covers an extremely wide range from ultra-clean to totally
distorted. The Gain control allows for the same large range on all PROFILEs, even if the original amp has a more
limited gain range.
The "Gain" parameter always compensates for loss in level, no matter how much you reduce it by. You can turn the
gain value to zero for every Amp PROFILE, and the result will be a totally undistorted and uncompressed sound that
has the same perceived loudness as the fully distorted version.

RIG VOLUME Knob (25)

The VOLUME knob on the right lower side of the front panel is the individual volume of the current Rig. For detailed
description please refer to chapter Rig Volume.