Four Pedals: Luxury - Kemper Profiler Main Manual

Expression Pedals and Foot Switches 130

Four Pedals: Luxury

Four dedicated pedals connected to PROFILER Remote; for PROFILER Stage use PEDAL 1-4 plugs
If you stick to these default assignments, you just need to plug in the TRS-cable, press "Calibrate" and perform a full
swell on the pedal to calibrate it. You can see the changing swell value of the pedal in the display, directly under the
soft button. You should then repeat that process on each of the four pages Pedal 3-6 in System Settings (Remote) or
Pedal 1-4 in Pedal Settings (Stage).
In this case, all pedals are completely independent. You could leave Volume, Morph, Wah, or Pitch at any in-
between position, while working another pedal.