Connecting Expression Pedals And External Switches; Remote Settings - Kemper Profiler Main Manual

PROFILER Remote 263

Connecting Expression Pedals and External Switches

The PROFILER Remote offers four TRS-inputs named PEDAL 3-6 to connect expression pedals. If you should
happen to require more switches, you can connect mono and dual switches to these sockets, too. The technical
requirements are the same as when connecting expression pedals, or switches, directly to the PEDAL 1 and 2 inputs
on the rear side of the PROFILER. Their functions can be assigned in the System Settings of the PROFILER on
"Pedal 3-6
pages (Remote)". More information and configuration examples can be found in the dedicated chapter
about expression pedals and foot switches.

Remote Settings

You can find a dedicated LCD CONTRAST knob on the rear side of the PROFILER Remote. All other LCD and LED
settings are edited on page "Remote Settings" within
System Settings of the PROFILER. The physical LCD contrast
knob overwrites the corresponding setting in System Settings during startup.
The display of the Remote always shows information most relevant to the mode of operation. With "Display Layout
A/B", you can choose either the signal chain or Rig Name to be displayed in Performance Mode.
The option "Group of 5/Single Rig" is explained in the paragraph entitled "Up/Down
Buttons".
Looper Location and Looper Volume are explained in the paragraph entitled "Looper".
If you don't need the TAP, TUNER or LOOPER buttons to function as their default you are free to assign other
switching functions, or to completely deactivate these buttons. The soft button "Button Assignment" opens the
"Remote Buttons" screen. Use the three soft knobs on this page to change the assignments according to your
needs. The option "Switch Up&Down" allows you to switch the functions of the Up/Down Buttons.
page in System Settings, you can find the option "Clock > Remote" to display the current time
On the Date and Time
on the Remote.
Incidentally, all these settings are also included in PROFILER backups.