Soft Buttons And Soft Knobs; On/Off Button; Lock Button - Kemper PROFILER Main Manual

Front Panel Controls 29

Soft Buttons and Soft Knobs (14)

There are four soft buttons above the display and four soft knobs below. They assume different functions depending
on the menu and page currently in focus. On the home screens of Browser Mode and Performance Mode, the soft
knobs represent the amplifier's equalizer.
On the Head and Power Head, the soft knobs have an LED collar which reflects their value. On the Rack and
PowerRack, values are displayed as numbers on the screen.

ON/OFF Button (15)

This button switches the currently selected module or section on and off. The light of a module or section button
shows you if a module is active or bypassed. You can also switch a module on and off by pressing the module
button itself.

LOCK Button (16)

Use the lock function to prevent a section or a module from being changed when you switch Rigs. To lock or unlock
individual modules, press their respective buttons while holding the LOCK button. Essentially, you can think of a
locked module as being "global".
To get an overview of the lock status of all modules, press and hold LOCK - all locked modules will be lit, while those
that are unlocked will remain unlit.
✓
The lock function works independently between Performance Mode and Browser Mode. So, you could, for example,
lock your Input Section in Browser Mode while keeping it unlocked in Performance Mode (which happens to be the
default setting).