Up/Down Buttons; Rig Buttons; Tap Button - Kemper PROFILER Main Manual

PROFILER Remote 192

Up/Down Buttons (1)

In Performance Mode, use these buttons to navigate through your Performances. A short tap will step up or down to
the next Performance. Holding will initiate scrolling. Depending on the status of the parameter "Performance Load" in
the System Settings, the PROFILER will either load Slot 1 or the current Slot of the selected Performance
immediately, or wait ("Pending") until you hit one of the five
Rig Buttons.
In Browser Mode, you can step or scroll through Rigs in your browse pool according to the selected View and Sort
criteria. The option "Group of 5/Single Rig" on page
Order Remote Settings in System Settings determines, if the
Up/Down Buttons step through the Rigs individually or by groups of five in Browser Mode.

Rig Buttons 1-5 (2)

These are the buttons for selecting Slots in Performance Mode, and Rigs in Browser Mode. Subsequent hits of these
buttons trigger Morphing.

TAP Button (3)

This button triggers the Tap Tempo, just like the TAP button on the front panel of the PROFILER. Tap in quarter
notes to adjust the tempo of delay, phaser, flanger, and tremolo effects. The LED will blink to indicate the current
tempo. Holding this button while you play to activate the marvelous Beat Scanner, which calculates the tempo
according to the rhythm and pattern of your playing. You can read more about this function in the Tempo chapter.