Loading Performances - Kemper PROFILER Main Manual

to two external devices whenever a Slot is loaded. You can find more information related to this feature in the
chapter.
The soft button labeled "Arrange" opens a screen where you can easily reshuffle Performances according to the set
list of your next concert. You can also copy and paste entire Performances on this screen.
It helps to assign meaningful names to Performances and Slots. Depending on how you want to organize your
sounds, Performances and Slots could, for example, carry names of songs and musical scenes, or amplifiers and
amp channels. Be aware that as long as the Slot Name is identical to that of the loaded Rig, Slot Name will be
automatically updated as soon as another Rig is loaded into that Slot. But if you have entered a Slot Name different
to the Rig Name (for example "Solo"), it will stay untouched if you load another Rig into that Slot. However, there is a
function called "Use Rig Name" on the Rename Slot screen, which allows you to reset Slot Name to Rig Name.
✓
While navigating Slots within a Performance via the left and right
(e.g. loading another Rig, or cranking up Gain) are interpreted as editing, and will be retained until you move to
another Performance. Don't forget to store before you load another Performance, if you want to make those
modifications permanent.
✓
As soon as you load another Slot from your foot controller, any former modifications within that Performance are
interpreted as temporary tweaks during a live performance, and will be discarded immediately. If, for example, you
had activated a booster in module B, or increased Delay Mix via pedal, any such changes will be lost if you switch
Slots remotely. This way, you can always be sure that Slots will be loaded in their original, predictable state during
live performances.

Loading Performances

"Performance
The Load" parameter in System Settings determines what happens, as you step or scroll through
Performances via Remote
PROFILER keeps waiting a few seconds for your Slot selection. "Slot 1" and "Keep Slot" load these Slots
automatically.
or MIDI. The default setting "Pending" means that the current Rigs stay loaded and the
Performance Mode 189
RIG navigation cross buttons, any modifications
MIDI