Audio Setup; Pedal Links - Kemper PROFILER Main Manual

Audio Setup

This page includes the following parameters:

Rig Change Crossfade Time (Rig X-Fade Time)
Most digital audio devices create an unpleasant gap in the audio signal when a preset is changed. The PROFILER
instead performs a crossfade between the previous and current Rigs, producing a seamless and smooth transition.
This crossfade time can be adjusted in a wide range. It affects both Browse and Performance Mode.

FX Loop Level
"FX Loop Level" controls the outgoing signal level of the hardware effects loop for correct leveling of the external
device. This helps to prevent noise or distortion. It is a global parameter and affects
is not affected by "FX Loop Level".
Stereo. Loop Distortion
✓
Increases of SEND output
versa. Therefore, the level and effect loop mix of the output signal stay unaltered.

Pedal Links

On this page, you can link pedal controllers as well as use soft knobs to simulate pedal behavior. For detailed
explanation please refer to chapter
level are compensated for corresponding decreases of
Expression Pedals and Foot
System Settings 182
Loop Mono as well as Loop
RETURN INPUT
Switches.
level and vice