System Settings; Lcd / Hw Setup / Brightness / User Interface - Kemper PROFILER Main Manual

System Settings

Press the SYSTEM button
another Rig.

LCD / HW Setup / Brightness / User Interface

On the LCD / HW Setup page you can control the settings for the display and adjust the "Line Frequency" parameter.
The soft button labeled "Factory Rigs" will allow you to reload all the factory Rigs and presets that were installed with
the operating system. Please note that this function doesn't overwrite any Rigs or presets in your browse pool.
Press the soft button labeled "Startup Dialog" to enter the menu where you can enter your name and set current time
and date. Whenever you create your own PROFILEs, the "Rig Author" tag will default to the Owner Name. The
"Startup Dialog" appears automatically when the PROFILER is started for the first time.
Using the soft button labeled "Edit Owner" you can edit the Owner Name, and assign a Device Name to your
PROFILER. Assigning unique Device Names is useful if you intend to connect and manage multiple PROFILER
units with the Rig Manager
The soft knob "Contrast" lets you set the contrast of the display. Adjust this setting if you find
Contrast
the display hard to read under certain circumstances.
The soft knob "Brightness" controls the brightness of the display.
Brightness
The soft knob "White Balance" adjusts the white balance of the display.
White Balance
The soft knob "Line Frequency" lets you choose between a line frequency of 50 or 60 Hz.
Line Frequency
The Noise Gate will use this setting to eliminate ground hum, the frequency of which is based
to access the global settings pages. Global settings do not change when you switch to
application.
System Settings 180