3.3.1 Mounting position
3.3.2 Cooling measures
DC1 series variable frequency drives are designed to be mounted vertically.
The maximum permissible inclination is 30°.
≦ 30º
≦ 30º
≦ 30º
Figure 23:
Mounting position
To ensure that there is sufficient air circulation, appropriate thermal
clearances must be maintained, with these clearances depending on the size
of the specific variable frequency drive.
b
a
1 2 3 4 5 6 7 8 9 10 11
1 2 3 4 5 6 7 8 9 10 11
Figure 24:
Clearances for air cooling (left: IP20; right: IP66)
→
The variable frequency drives with IP20 degree of protection
can be mounted side by side without any lateral clearance
between them.
DC1...20... and DC1...OE1 Variable Frequency Drives 02/20 MN040059EN www.eaton.com
≦ 30º
a
a
3 Installation
3.3 Mounting
b
a
63