Mounting - Eaton EMS2 Series Manual

2 Motor starters

2.4 Mounting

2.4 Mounting
16
Devices in the EMS2-DO-..., EMS2-DOS-..., EMS2-RO-... and EMS2-ROS-...
series are designed for mounting on a 35-mm-top-hat rail.
Figure 7: Mounting on top-hat rail
Notes
￫
Note that the direct linking of devices with a rated operational
current I
e
ing) under some circumstances.
￫
EMS-XBR-... (￫ section 9.1.1, "Three-phase current connec-
tor", page 53) three-phase current connectors can be used to
connect the supply terminals 1L1, 3L2 and 5L3 of up to 5
devices in a row.
EMS2... Electronic motor starter 10/19 MN034003EN www.eaton.com
of 9 A can lead to a reduction in performance (derat-