Eaton PowerXL DC1 20 Series Installation Manual page 87

3.6.1.2 Terminals in power section for units with IP66 degree of protection
On units with an IP66 degree of protection, the connection area is located
behind the lower enclosure cover.
To open the cover, the two screws must be loosened. You can lift the cover
afterwards.
PZ2
1.5 Nm
(13.28 lb-in)
5
Figure 43: Removing the lower housing cover
DC1...20... and DC1...OE1 Variable Frequency Drives 02/20 MN040059EN www.eaton.com
3 Installation
3.6 Electrical Installation
83