General Accessories (List) - Eaton PowerXL DC1 20 Series Installation Manual

7.2 General accessories (List)

Table 51: PowerXL accessories
Part no.
DX-KEY-LED2
DX-KEY-OLED
DX-NET-SWD3
DX-COM-STICK3
DX-CBL-PC-3M0
DX-SPL-RJ45-2SL1PL
DX-SPL-RJ45-3SL
drivesConnect
￫
If you intend to use an external keypad and/or a parameter
copying stick with a DC1-...E1 variable frequency drive, please
note that only models DX-KEY-LED2 and DX-COM-STICK2 and
DX-COM-STICK3 will work.
DX-KEY-OLED can be used, but requires an update first.
DC1...20... and DC1...OE1 Variable Frequency Drives 02/20 MN040059EN www.eaton.com
Description
External keypad
Interface card for connecting to a SmartWire-DT network
Parameter copying stick for establishing a Bluetooth
connection to PC software or via smartphone app
Wired communication between variable frequency drive and
PC
RJ45, 8-pin, splitter, 2 sockets, 1 plug on short connection
cable
RJ45, 8-pin, splitter, 3 sockets
PC parameter configuration software for variable frequency
drives, with integrated oscilloscope function, drive control
function, and function block creation for DA1
7 Accessories
7.2 General accessories (List)
Document
AP040022,
IL04012020Z
MN04012009Z,
IL04012025Z
MN040003,
IL04012021Z
MN040003
lL04012023Z
lL04012023Z
MN040003
189