Eaton PowerXL DC1 20 Series Installation Manual page 140

4 Operational
4.6 Help cards
136
Example (adjust the motor protection function)
The following example shows how to adjust the motor protection function:
View
Stop
P-01
P-08
A 2. 3
A 1. 9
Stop
DC1...20... and DC1...OE1 Variable Frequency Drives 02/20 MN040059EN www.eaton.com
Explanation
Operating state Stop
> 1 s
Press the OK button and hold it down for about two
seconds.
Use the ▲ (Up) or ▼ (Down) arrow key to select
parameter P-08.
Press the OK button to confirm.
The rated operational current (2.3 A) for the
4 x
DC1-342D3 variable frequency drive will be displayed.
Press the ▼ (Down) arrow key four times in order to
> 1 s P-08
= 1.9 A
set the appropriate rated motor current (1.9 A with
400 V).
The motor protection function will be adjusted so as to
match the motor being used
Press the OK button and hold it down for about two
seconds to confirm.