Table of Contents
Advertisement
4
4.1
The MTL4-CS16 and MTL4-DS16 carriers are designed for mounting in a control room
equipment cabinet and are suitable for T section DIN-rail mounting in any orientation – but
see also Section 4.5 for possible heat and power considerations when multiple carriers
are mounted in a cabinet.
The two dimensions given for the overall length of the carrier show the difference
between the single alarm module carrier and the dual alarm module carrier – MTL4-
CS16.
When mounted, the overall height of the carrier from the underside of the DIN rail
INM MTL SUM5 Rev 1
CARRIER INSTALLATION
DIN-rail mounting
138 mm
Figure 4.1 - Dimensions of standard carrier
and excluding the surge protection module, will be 190mm.
195 mm
A B C A B C A B C A B C A B C A B C A B C A B C
1A 1B 2A 2B
1
ALARM
2
138 mm
NOTE
PWR1 PWR2
15
V1 V2 0V 0V
16
POWER
7
Advertisement
Table of Contents
