Eaton PowerXL DC1 20 Series Installation Manual page 81

￫
For more information and technical data on DX-EMC-MNT-...
EMC cable brackets, please refer to instruction leaflet
IL040010ZU.
￫
DX-EMC-MNT-... EMC cable brackets are sold as individual
units. There are different brackets for each DC1 variable
frequency drive size (FS1 to FS3).
The gland plates and their fixing screws are included in the
equipment supplied with the cable brackets.
Connection example

DX-EMC-MNT ... M
Figure 40: EMC cable brackets (example: FS2 frame size)
DC1...20... and DC1...OE1 Variable Frequency Drives 02/20 MN040059EN www.eaton.com
3.5 EMC installation
DX-EMC-MNT ... N

FS1, FS2:
3 Installation
= 4 x M4
FS3: = 4 x M5
1.3 Nm
(11.5 lb-in)
77