Ip66 / Nema4X Degree Of Protection - Eaton PowerXL DC1 20 Series Installation Manual

3.4 IP66 / NEMA4X degree of protection

IP66 DC1 variable frequency drives are available in two versions:
• DC1-...-A66: Activation via control signal terminals
• DC1-...-A6S: Controlled with controls on the front and/or control signal
terminals
DC1-...-A66
Figure 31: IP66 variants
The units must be mounted, with four screws and in a vertical position, on a
wall or panel that is made of nonflammable material and is stable enough to
hold the variable frequency drive's weight.
FS1, FS2,
= 4 x M4
FS3, FS4
1 Nm (8.85 lb-in)
On the DC1-...-A6S version, the main disconnect switch can be locked in the
OFF position with a standard padlock.
DC1...20... and DC1...OE1 Variable Frequency Drives 02/20 MN040059EN www.eaton.com
3.4 IP66 / NEMA4X degree of protection
DC1-...-A6S
Figure 32:
Figure 33:
▶
⌀
⌀ = 5 mm ￫ 2 x
(⌀ = 0.20" ￫ 2 x)
3 Installation
Openings for fixing
screws
DC1-...-A6S with
padlock
Push on the center of
the switch in order to
open the opening for
the padlock.
69