Rotary Axes; Signals To Axis/Spindle (Db31; Signals From Axis/Spindle (Db31 - Siemens SINUMERIK 840D sl Function Manual

DB31, ...
DBX104.0 - 7
Edge evaluation: No
Signal state 1 or edge
change 0 → 1
Signal state 0 or edge
change 1 → 0
Corresponding to ....
19.13

Rotary axes

19.13
19.13.1

Signals to axis/spindle (DB31, ...)

DB31, ...
DBX12.4 Traversing range limitation for modulo rotary axes
Edge evaluation: No
Signal state 1 or Activate traversing range limitation for modulo rotary axes
edge change 0 → 1 (software end switches, work field limitations).
Signal state 0 or Deactivate traversing range limitation for modulo rotary axes.
edge change 1 → 0
Signal irrelevant for Linear axes/rotary axes without modulo functionality.
...
Application Built-on rotary axis with monitoring
example(s)
19.13.2

Signals from axis/spindle (DB31, ...)

DB31, ...
DBX74.4 Monitoring status with modulo rotary axes
Edge evaluation: No
Signal state 1 or Traversing range limitation for modulo rotary axes active
edge change 0 → 1 (software end switches, work field limitations).
Signal state 0 or Traversing range limitation for modulo rotary axes not active.
edge change 1 → 0
Signal irrelevant for Linear axes/rotary axes without modulo functionality.
...
Application Built-on rotary axis with monitoring
example(s)
Extended Functions
Function Manual, 09/2009, 6FC5397-1BP20-0BA0
Active infeed axes
Signal(s) updated: Cyclic
The axis sending the signal is currently the oscillation axis and is indicating its active infeed
axes in this field (104.0 axis 1 is infeed axis, 104.1 axis 2 is infeed axis, etc.).
The associated axis is not an infeed axis.
DBX100.7
Signal(s) updated: Cyclic
Signal(s) updated: Cyclic
Z2: NC/PLC interface signals
19.13 Rotary axes
1079