Logo Operations - NovaStar NovaPro UHD User Manual

− Initial Y: Set the vertical initial coordinate of the top-left corner of the cropped area on the original
image.
− Width: Set the width of the cropped image.
− Height: Set the height of the cropped image.

Scale: Scale the imported image.
− Keep aspect ratio: After this item is selected, when you adjust the width or height, the system will
automatically calculate the height or width based on the set aspect ratio.
− Width: The LOGO image width after scaling
− Height: The LOGO image height after scaling

Replace: Select a new BKG image and replace the current one.
Step 4 Click Apply to save the edited LOGO image to LOGO list and send the LOGO image to the NovaPro UHD.

7.3.5.2 LOGO Operations

Loading LOGO
Click a LOGO in the LOGO list to load the LOGO image to the editing area. The LOGO is always located at
the top. The LOGO priority cannot be adjusted.
Click at the top-right corner of the LOGO to delete it.
LOGO Operations

BKG list operations
Hover the mouse over the LOGO list to show the LOGO operation menu.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
78