Safety Instructions; Environmental Requirements; Operation Requirements; Personal Safety - NovaStar NovaPro UHD User Manual

1

Safety Instructions

1.1 Environmental Requirements


Ensure adequate air flow in the equipment
room.

Take measures to prevent dust, water and
static electricity.

Avoid long-term direct sunlight.

Do not place the equipment in a position near
fire and heat.

1.2 Operation Requirements


Only trained technicians may repair the
equipment.

Save the packing boxes and materials for
future storage and shipping of the equipment.

Wear a wrist band and insulating gloves.

Handle the equipment with care at all times.
Hold the handles or bottom of the equipment
when you move it.

Place the equipment in a stable position.

Be careful not to drop anything into the
equipment.

Do not bundle the signal wires and the strong
current wires or high voltage wires together.

Avoid stacking of equipment. It is suggested
that you leave 1U space between equipment,
keep the cooling vents open and maintain a
minimum distance of 10 cm between the
vents and other objects.

Keep the equipment away from conductors
that attract lightning to avoid strike.

Do not operate the equipment with excessive
force.

1.3 Personal Safety


Ensure that the equipment is well grounded.
Make sure that the PE wire is in good
condition and grounded. If the equipment has
a grounding connector, connect it to the
ground.

Place the equipment in a stable position to
prevent personal injury caused by dropping.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual

Do not place the equipment in an area
containing explosive materials.

Do not place the equipment in a corrosive
environment.

Do not place the equipment in a strong
electromagnetic environment.

Do not make the boards contact with each
other.

Do not touch the board circuits, components,
connectors or slots with bare hands.

Do not repair the equipment by yourself.
Please contact NovaStar for repair at any
time.

Only replace faulty parts with NovaStar-
authorized replacement parts.

Ensure that the equipment is well grounded.
Make sure that the PE wire is in good
condition and grounded. If the equipment has
a grounding connector, connect it to the
ground.

Place the equipment in a stable position to
prevent personal injury caused by dropping.

Ensure that the wires are not exposed. Please
repair or replace the wires in a timely manner
if they are broken.

Do not perform any equipment operation or
cable connection outdoors in a thunderstorm.

Do not wear watches, rings, or other metal
jewelry when replacing faulty parts or
repairing the equipment.

Ensure that the wires are not exposed. Please
repair or replace the wires in a timely manner
if they are broken.

Do not perform any equipment operation or
cable connection outdoors in a thunderstorm.

Do not wear watches, rings, or other metal
jewelry when replacing faulty parts or
repairing the equipment.
1