Bkg; Input Settings; Dvi Input Mode - NovaStar NovaPro UHD User Manual

Menu
Note:

OSD has the second highest priority, and is placed on the top of other layers.

Press the OSD button in the FUNCTION area on the device front panel to enter the OSD settings screen.

5.4.4 BKG

Set the background image that has the lowest priority.
Menu
Status
Type
BKG Image/
Pure Color BKG
Capture
Figure 5-20 Capturing

5.5 Input Settings

5.5.1 DVI Input Mode

This menu can be shown and set when the DVI input card is installed. If no DVI card is installed, this menu is
hidden.
DVI input card supports Single Link and Dual Link modes.

Single Link: 4x Single link DVI connectors, each with up to 1920×1080@60Hz input resolution

Dual Link: 2x Dual-link DVI connector (2 & 4) , each with up to 3840×1080@60Hz input resolution
www.novastar.tech
Description
 V Height: Set the vertical height of the OSD file after cropping.
 Initial X: Set the horizontal initial coordinate of the cropped part upon the OSD file.
 Initial Y: Set the vertical initial coordinate of the cropped part upon the OSD file.
 Reset: Reset all the settings to defaults.
Description
Turn on or turn off the BKG function. The default option is Off.
Select the desired BKG file. The options are Pure Color and Image.
 BKG Image: Capture the input source as a BKG image or import a BKG image from
Master VI.
 Pure Color BKG: Set the individual R, G and B values to set a pure color as the
BKG.
 Source: Select an input source to be captured.
 Save To: Set the save location of the captured image.
− If a BKG image already exists in the location, the original image will be
overwritten by the new one.
− The location name consists of two parts: BKG and a number.
− At most 16 BKG images can be saved.
 Capture: Save the captured input source image to the selected location.
Note:
If the AUX signal source is set to PGM or PVW and the source for capturing is PVW
or PGM, the AUX display will flicker during BKG capturing.
NovaPro UHD All-in-One Controller User Manual
19