Layer Properties - NovaStar NovaPro UHD User Manual

Figure 7-11 Layer operations

Switch Source: Switch the input source for the current layer.

Bring to Front/Send to Back: Bring the selected layer to front, or send the selected layer to back.

Bring Forward/Send Backward: Move the layer up or down to adjust the layer priority.

Pixel to Pixel: In pixel to pixel mode, the layer size is the same as the current input image resolution. Layer
scaling is disabled in this mode.

Full Screen: Make the layer display in full screen.

Close Current Layer: Close the selected layer.

Close All Layers: Close all the layers in the editing area.

7.3.2.1 Layer properties

After a layer is added, the Properties pane on the right is available when you click the layer.
Figure 7-12 Setting layer properties

Aspect Ratio: Adjust and show the proportional relationship between the layer width and its height. Select
a desired aspect ratio from the drop-down list next to Aspect Ratio.
If the layer the width remains the same during the adjusting process, the height will be changed based on
the set aspect ratio.
When you manually adjust the layer size in the editing area, the Aspect Ratio area displays the actual
layer aspect ratio.

Position and Size: Adjust the layer position and size on the screen.
− X: Set the horizontal coordinate of the layer top-left corner on the screen.
− Y: Set the vertical coordinate of the layer top-left corner on the screen.
− W: Set the layer width.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
65