Screen Configuration; Adding Cabinets - NovaStar NovaPro UHD User Manual

Area Function
D

6.2 Screen Configuration

Figure 6-3 Adding cabinets and setting cabinet connection type
Area Function
Refresh
Hot Backup
Device Mapping
Brightness
Frame Rate
Cabinet Management
Cabinet Connection
Disconnect
Edit Advanced
View
Send
Save to HW

6.2.1 Adding Cabinets

Step 1 Select the device type and Ethernet port type.
Step 2 Go to Edit > Cabinet Management. Click the following icons to select the cabinet types.
www.novastar.tech
Description
Shut down the connected devices.
Set the user permissions.
Password is required for login. The default password is null.
Description
Refresh and read the hardware information again.
Backup between the devices or backup between the Ethernet ports
Display the receiving card numbers and Ethernet port information on
the cabinets.
Adjust the brightness of the LED screen.
Set the output frame rate of the NovaPro UHD.
Add cabinets and set the cabinet sizes.
Select the cabinet connection type.
Delete the lines between cabinets.
Set the cabinet display status in the editing area and the snapping
mode.
Front view and rear view of the cabinets
Send the display configuration file to the hardware devices.
Send and save the screen configuration files to the hardware devices.
NovaPro UHD All-in-One Controller User Manual
33