Adding Layers - NovaStar NovaPro UHD User Manual

Parameter Description
Height -
Opacity Set the opacity of the LOGO file.
BKG
At most 16 BKG files can be added.

Adding BKG files
a. Click + in BKG area to enter the BKG settings page.
b. Click Image or Capture to add local files or capture an input source image as the BKG files.
c. Click to add a new BKG file.
d. Click Apply to save the newly-added BKG files to the software library.

Applying BKG files
Select the desired BKG file and click the file to add it to PVW.

6.3.4 Adding Layers

Step 1 Click to select a signal source on the left.
Right click the edit icon on the right of the signal source to rename the signal source.
Step 2 In the video editing area, click and drag the mouse to create a custom-sized layer.
You can also select a signal source and drag it to the video editing area, and then release the mouse to create
a layer.

When you move the mouse to any edge of the layer and a double-headed arrow appears, you can click
and drag the layer edge to adjust the layer size.

When you move the mouse to the layer area, you can click and drag the layer to change its position.

When a single layer is selected, you can press the arrow buttons to fine tune the layer position, while hold
down the Shift key and press the arrow buttons to fine tune the layer size.

When you move the mouse to the layer top, five buttons appear in the top right corner of the layer. The
detailed button functions are shown in
Table 6-5 Layer buttons
Icon Description
Make the layer fill the screen loaded by the current connector.
Make the layer fill the whole output screen.
Close the layer.
Enable the pixel-to-pixel display mode.
Unlock the layer.
Lock the layer.
You can right click the layer to perform the following operations:

Switch Source: Change the signal source of the layer.

Bring to Front: Bring the layer to the front.

Send to Back: Send the layer to the back.
www.novastar.tech
Description
 100%: Nontransparent
 0%: Transparent
Table 6-5.
NovaPro UHD All-in-One Controller User Manual
47