Display Control; Advanced Functions; Hdr - NovaStar NovaPro UHD User Manual

Load Area Width
Load Area Height
Load Area Initial X
Load Area Initial Y

5.8 Display Control

This function is used to control the display. You can set the display to go black, display a test pattern, or go
back to normal display. You can also set the transition effect and effect duration.
Menu
Normal
Freeze
Black Out
Test Pattern
Output Color
PVW to PGM
Transition Effect
Effect Duration

5.9 Advanced Functions

Advanced functions include HDR, low latency, OPT mode and AUX.

5.9.1 HDR

HDR is an acronym for High-Dynamic Range. HDR function can greatly enhance the display image quality,
allowing for a more clear and vivid image when the device is used together with A8s/A10s Plus receiving
cards.
www.novastar.tech
3840
2160
3840
0
Description
Display the current input source normally.
Freeze the current frame of the output image.
Make the screen go black.
Test the display effect and working status of the LED screen.
Test patterns include Pure Color, Gradient, Grid and so on.
Adjust the output image quality and the LED screen will display the effect in real-time.
 Brightness: The value ranges from 0 to 100, and defaults to 50. The stepping is 1.
 Contrast: The value ranges from 0 to 100, and defaults to 50. The stepping is 1.
 Saturation: The value ranges from 0 to 100, and defaults to 50. The stepping is 1.
 Gamma: The value ranges from 0.25 to 4.00, and defaults to 1.00. The stepping is
0.01.
 Reset: Reset all the settings to defaults.
Set the display relationship between PVW and PGM.
The options are COPY (default) and SWAP.
 COPY: Send the PVW to PGM.
 SWAP: Swap the display on PVW and PGM.
Set the PGM transition effect. Up to 16 transition effects are supported.
The default option is Fade.
Set the duration of the transition effect.
The value ranges from 0.5s to 2s, and defaults to 0.5s.
NovaPro UHD All-in-One Controller User Manual
0 0
0 2160
3840
2160
24