Osd - NovaStar NovaPro UHD User Manual

Menu
Select LOGO
Initial X
Initial Y
Opacity
Crop
Note:

LOGO has the highest priority and is placed on the top of OSD and BKG.

Press the LOGO button in the FUNCTION area on the device front panel to turn on the LOGO function
and enter the LOGO settings screen.
Figure 5-19 LOGO cropping

5.4.3 OSD

Set the text and picture overlay display effect for the output image.
Menu
Status
Select OSD
Initial X
Initial Y
Speed
Direction
Opacity
Crop
www.novastar.tech
Description
Select a desired LOGO file.
The LOGO file is sent by the built-in platform Master VI.
Set the horizontal initial coordinate of the LOGO file upon the screen.
The value ranges from –8192 to +8192, and defaults to 0.
Set the vertical initial coordinate of the LOGO file upon the screen.
The value ranges from –8192 to +8192, and defaults to 0.
Set the opacity of the added LOGO file.
The value ranges from 0% (transparent) to 100% (nontransparent), and defaults to
100%.
 Status: Turn on or turn off the LOGO cropping function. The default option is Off.
 H Width: Set the horizontal width of the LOGO file after cropping.
 V Height: Set the vertical height of the LOGO file after cropping.
 Initial X: Set the horizontal initial coordinate of the cropped part upon the LOGO file.
 Initial Y: Set the vertical initial coordinate of the cropped part upon the LOGO file.
 Reset: Reset all the settings to defaults.
Description
Turn on or turn off the OSD function. The default option is Off.
Select a desired OSD text or image.
Set the horizontal initial coordinate of the OSD file upon the screen.
The value ranges from –8192 to +8192, and defaults to 0.
Set the vertical initial coordinate of the OSD file upon the screen.
The value ranges from –8192 to +8192, and defaults to 0.
Set the OSD scrolling speed. The value ranges from 1 to 3, and defautls to 1.
This function is available when OSD is text.
Set the OSD scrolling direction.
The options are From Right to Left (default) and From Left to Right.
This function is available when OSD is text.
Set the OSD opacity.
The valur ranges from 0% (transparent) to 100% (Nontransparent), and defaults to
100%.
 Status: Turn on or turn off the OSD cropping function. The default option is Off.
 H Width: Set the horizontal width of the OSD file after cropping.
NovaPro UHD All-in-One Controller User Manual
18