Input Color - NovaStar NovaPro UHD User Manual

Standard Resolution
Select a standard resolution and frame rate. Rotate the knob to select Apply and press the knob to make the
settings take effect. If you do not press the knob, the settings will not take effect.
Figure 5-24 Standard resolution
Custom Resolution
Set a custom width, height and frame rate. Then rotate the knob to select Apply and press the knob to make
the settings take effect. If you do not press the knob, the settings will not take effect.
Figure 5-25 Custom resolution

5.5.4 Input Color

Adjust the parameters of the input source image.
Menu
Brightness
Contrast
Saturation
Hue
Gamma
Reset
www.novastar.tech
Description
Adjust the brightness of the input source.
The value ranges from 0 to 100, and defaults to 50.
Adjust the contrast of the input source.
The value ranges from 0 to 100, and defaults to 50.
Adjust the saturation of the input source.
The value ranges from 0 to 100, and defaults to 50.
Adjust the hue of the input source.
The value ranges from –180 to +180, and defaults to 0.
Adjust the Gamma value of the input source.
The value ranges from 0.25 to 4.00, and defaults to 1.00. The stepping is 0.01.
Reset all the settings to defaults.
NovaPro UHD All-in-One Controller User Manual
21