Color Range; Hdcp; Preset Settings; Image Mosaic - NovaStar NovaPro UHD User Manual

5.5.5 Color Range

This function can automatically convert the limited RGB color range to full RGB range for the input source, so
the device can process the source precisely.

Off: Turn off the function.

On: Turn on the function. It is recommended you turn on the function when the input source has a limited
RGB color range.

5.5.6 HDCP

When the HDMI or DVI input card is used, the HDCP function is supported.

On: Turn on the HDCP function.

Off: Turn off the HDCP function.

5.6 Preset Settings

The NovaPro UHD supports up to 16 presets. Users can save, load and clear the presets.
Step 1 Rotate the knob to select Preset Settings and press the knob to enter the submenu.
Step 2 Rotate the knob to select a desired preset and press the knob to pop up a dialog box. In the displayed box,
four preset operations are provided: Save, Load, Clear or Copy To.
Figure 5-26 Preset operations
Menu
Save
Load
Clear
Copy To
Note:
If you did not set any layers, BKG, LOGO or OSD, you cannot save a preset.

5.7 Image Mosaic

When the pixel count of the LED screen is larger than the loading capacity of a single NovaPro UHD unit, the
image mosaic function is required. At most 4 device units can be linked through the USB cables.
Select Image Mosaic on the main menu screen to enter the image mosaic menu screen.
www.novastar.tech
Description
Save the current layer layout and settings to the target preset.
Load the selected preset.
Clear all the contents in the selected preset.
Copy the current preset to a target preset.
NovaPro UHD All-in-One Controller User Manual
22