About Us; Communication Settings; Communication Mode; Network Settings - NovaStar NovaPro UHD User Manual

5.10.8 About Us

View the device hardware version, company website (www.novastar.tech) and email address
(support@novastar.tech).

5.11 Communication Settings

5.11.1 Communication Mode

Figure 5-36 Communication mode
The device is connected to the PC through USB port and Ethernet port. The options are USB Preferred and
LAN Preferred.

When USB Preferred is selected, the device prefers the communication through USB port.

When LAN Preferred is selected, the device prefers the communication through Ethernet port.

5.11.2 Network Settings

The options are Manual and Auto.

Manual: Set the device IP address, subnet mask and gateway manually.

Auto: The device reads the network parameters automatically.

Reset: Reset all the settings to defaults.
Figure 5-37 Network settin\gs
Note:
1. When communicating with the control PC, the device and control PC must be on the same LAN.
2. The IP address of current device cannot conflict with IP addresses of other devices.

5.12 Langugage

The NovaPro UHD supports English and Chinese. You can freely switch to either language.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
31