Aux Settings; Test Pattern; Synchronization Mode - NovaStar NovaPro UHD User Manual

7.5.2 AUX Settings


Enable: Select Enable to turn on the AUX function. It is deselected by default.

Follow Preset: Set whether the AUX follows the preset during switching.
− Selected: If the preset has AUX data, the AUX input source will be switched during preset switching.
− Deselected: The AUX input source will not be switched during preset switching.

AUX Scaling: Set the AUX display mode.
− Full Screen: Make the image display in full screen.
− Proportional: Scale the image proportionally and then display it on the screen.

AUX Source: Select a desired AUX source. The options include all the input sources, PVW and PGM.

7.5.3 Test Pattern

Test pattern is used to test the display effect and working status of the LED screen. Test patterns include Pure
Color, Gradient, Grid, Brightness, Spacing and Speed.

Normal: Close the test pattern and display the current playback image normally.

All the test patterns

Brightness: Set the brightness of the test pattern. The value ranges from 1 to 4, and defaults to 3.

Spacing: When the test pattern is gradient or grid, the item is available. When the test pattern is pure color,
the item is unavailable. The value ranges from 1 to 8, and defaults to 5.

Speed: When the test pattern is grid, the item is available and is used to set the moving speed of the grid.
When the test pattern is pure color or gradient, the item is unavailable. The value ranges from 1 to 4, and
defaults to 3.

7.5.4 Synchronization Mode

Select a synchronization signal to synchronize all the linked device units and make the output images on all
the devices display in sync.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
83