Input Source; Input Source Resolution - NovaStar NovaPro UHD User Manual

Figure 5-21 Single link mode
Figure 5-22 Dual link mode

5.5.2 Input Source

The NovaPro UHD provides SDI-1, SDI-2, SDI-3, SDI-4, INPUT1, INPUT2, INPUT3, INPUT4, DP and HDMI
input connectors. The input source is named after the input connector.
Rotate the knob to select a desired input source and press the knob to access the input source resolution
menu.
Note:
When DP is selected as the input source and the DP source is from the VIO 4K from ANALOG WAY, hold
down the ESC button on the device front panel to enter the Parameter Settings screen and turn on SWING
Configuration.

5.5.3 Input Source Resolution

Adjust the resolution and frame rate of the input source through either of the following ways.

Standard resolution

Custom resolution
Figure 5-23 Setting input source resolution
Note:
The SDI input source does not support the input resolution settings.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
20