Layer Configuration - NovaStar NovaPro UHD User Manual

Name
Send
Save
Device Properties
Click the target cabinet and go to the Properties tab to view the device properties.

Connection: 2-1-1 denotes that the sending card number is 2, Ethernet port number is 1, and the receiving
card number is 1.

Mapping Position: Horizontal and vertical coordinates of the top left corner of the selected cabinet on the
screen

Position: Horizontal and vertical coordinates of the top left corner of the selected cabinet on the canvas

Test Pattern: Test the display effect.

Program Version: Refresh, download or update the program version of the receiving card.
−
: Read the firmware version of the receiving card, which is only applicable to single cabinet.
−
: Download the firmware program of the receiving card, which is only applicable to single cabinet.
−
: Update the firmware program of the receiving card, which is applicable to both single cabinet and
multiple cabinets.
Figure 6-7 Device properties

6.3 Layer Configuration

Add or delete the layers, OSD, LOGO and BKG, as well as set the layer properties and image quality.
Layer provides three function modules:

System: Connect, refresh and test the device.
www.novastar.tech
Description
Send the color gamut parameters to receiving card and these settings will be lost
after power off.
Send and save the color gamut parameters to receiving card and these settings
will not be lost after power off.
NovaPro UHD All-in-One Controller User Manual
37