Logo - NovaStar NovaPro UHD User Manual

Figure 5-18 Oval layer

5.4.2 LOGO

Display the company Logo.
Menu
Status
Select LOGO
Initial X
Initial Y
Opacity
Crop
Note:

LOGO has the highest priority and is placed on the top of OSD and BKG.

Press the LOGO button in the FUNCTION area on the device front panel to turn on the LOGO function
and enter the LOGO settings screen.
Figure 5-19 LOGO cropping
www.novastar.tech
Description
Turn on or turn off the LOGO function. The default option is Off.
Note:
If no LOGO images are added or imported, the LOGO function cannot be turned on.
Select the desired LOGO file.
The LOGO file is sent by the built-in platform Master VI.
Set the horizontal initial coordinate of the LOGO file upon the screen.
The range is -8192 to +8192 and the default value is 0.
Set the vertical initial coordinate of the LOGO file upon the screen.
The range is -8192 to +8192 and the default value is 0.
Set the opacity of the added LOGO file.
The range is 0% (transparent) - 100% (non-transparent) and the default value is
100%.
Status: Turn on or turn off the LOGO cropping function. The default

option is Off.
H Width: Set the horizontal width of the LOGO file after cropping.

V Height: Set the vertical height of the LOGO file after cropping.

Initial X: Set the horizontal initial coordinate of the part after cropping

upon the LOGO file.
Initial Y: Set the vertical initial coordinate of the part after cropping upon

the LOGO file.
Reset: Reset all the settings to defaults.

NovaPro UHD All-in-One Controller User Manual
12