3.2 Rear Panel
Note:
The NovaPro UHD supports the replacement of the HDMI input card (standard configuration). You can buy a
DVI input card to replace the HDMI input card.
Input
Connector
12G-SDI
DP 1.2
HDMI 2.0
HDMI 1.3
Output
Connector
Ethernet port
OPT 1–4
www.novastar.tech
Quantity
Description
Supports ST-2082-1 (12G), ST-2081-1 (6G), ST-424 (3G) and ST-
4
292 (HD).
Up to 4K×2K@60Hz input resolution
Connector 4 supports deinterlacing processing.
Supports 12G-SDI output with loop-through.
Note:
When the input source is a 12G-SDI signal, a CANARE / L-4.5CHD+ /
UHDTV-SDI SDI cable is required and it cannot be longer than 50 m.
Up to 4K×2K@60Hz (8K×1K@60Hz) input resolution
1
HDCP 1.3 compliant
Does not support interlaced input signals.
Up to 4K×2K@60Hz (8K×1K@60Hz) input resolution
1
HDCP 1.4 and HDCP 2.2 compliant
Does not support interlaced input signals.
Supports HDMI 2.0 output with loop-through.
D_4×HDMI 1.3 input card (can be replaced by a D_4×DVI input card)
4
Up to 1920×1080@60Hz input resolution for each connector
HDCP 1.3 compliant
Supports interlaced input signals.
Quantity
Description
16
Gigabit Ethernet outputs
Max. loading capacity: 10.4 million pixels
Max. width: 16,384 pixels
Max. height: 8,192 pixels
4
10G fiber optical outputs (copy and hot backup)
OPT 1 transmits data on Ethernet ports 1–8.
OPT 2 transmits data on Ethernet ports 9–16.
NovaPro UHD All-in-One Controller User Manual
4