Screen Configuration; Screen Brightness; Quick Configuration - NovaStar NovaPro UHD User Manual

7.2 Screen Configuration

7.2.1 Screen Brightness

Step 1 Click Configuration to enter the screen configuration page.
Step 2 In the text box below Screen Brightness, enter a brightness value directly.
The brightness value will be sent to the device in real time, and the LED brightness will be changed
accordingly.
You can also click + or - to fine tune the value.
Figure 7-1 Screen brightness adjustment
0: The lowest brightness (the screen is black)
100: The highest brightness
7.2.2 Screen Configuration

7.2.2.1 Quick Configuration

Prerequisites

LED screen must be a regular screen.

Cabinets of the screen must be regular cabinets with the same resolution.

The following data flow settings are supported. During data flow settings, you must ensure that the
physical connection of each port is along the same direction and downward to next one.

During data flow settings, you must ensure that the Ethernet Port 1 is at the beginning position of the
whole physical connection.

The quantity of cabinets loaded by each Ethernet port must meet the following requirement: Ethernet port
1 ≥ Ethernet port 2 ≥ Ethernet port 3 ≥ Ethernet port 4 ≥ ... ≥ Ethernet port 16

The quantity of cabinets loaded by each Ethernet port must be an integer multiple of the screen cabinet
row quantity or column quantity.
www.novastar.tech
NovaPro UHD All-in-One Controller User Manual
56