Adding Layers - NovaStar NovaPro UHD User Manual

7.3.2 Adding Layers

Step 1 Select a desired input source from the Input Source list.
Step 2 Click the editing area and drag the mouse to create a custom-sized layer.
You can also select an input source and drag it to the editing area, and then release the mouse to create a
layer. The layer input source is the source you selected previously.
Figure 7-10 Adding layers
Table 7-2 Layer icon descriptions
Icon Name
Unlock layer
Lock layer
Pixel to pixel
Close pixel to pixel
Full screen
Close full screen
Close layer
Click any of the small white squares on the layer edges and drag the square to adjust the layer size.
Right click the layer and you can perform the following operations as required.
www.novastar.tech
Description
When the layer is locked, click this icon to unlock the layer.
Click this icon to lock the layer.
In pixel to pixel mode, the layer size is the same as the current input
image resolution.
Click this icon to exit the pixel to pixel mode and display the input source
in its orignal size.
Click this icon to make the current layer display in full screen.
Click this icon to exit the full screen mode and restore the current layer
to its original size.
Click this icon to close the current layer.
NovaPro UHD All-in-One Controller User Manual
64