Screen Settings; Quick Configuration; Advanced Configuration - NovaStar NovaPro UHD User Manual

All-in-one controller

Hide thumbs Also See for NovaPro UHD:

Table of Contents

Step 2 Select Screen Brightness and press the knob to confirm the selection.

Step 3 Rotate the knob to adjust the brightness value, and the LED screen will display the effect in real-time. Then

press the knob to apply the brightness when you are satisfied with it.

5.3 Screen Settings

Preconditions



LED screen must be a regular screen.



Cabinets of the screen must be regular cabinets with the same resolution.



The following data flow settings are supported. During data flow settings, you must ensure that the

physical connection of each port is along the same direction and downward to next one.



During data flow settings, you must ensure that the Ethernet Port 1 is at the beginning position of the

whole physical connection.

Procedure

Step 1 Power on the LED screen.

Step 2 Go to Screen Settings > Quick Configuration, and press the knob to enter the quick configuration screen.

Figure 5-3 Quick configuration

Step 3 Set Cabinet Row Qty and Cabinet Column Qty according to the actual row and column quantities of the

cabinets.

Step 4 Select Port 1 Cabinet Qty to set the quantity of the cabinets loaded by Ethernet port 1.

Step 5 Select Data Flow and press the knob, then select an appropriate one.

Data flow is the physical cabinet connection pattern when viewed in front of the screen.

During data flow settings, you can view the real-time effects of different data flow settings on LED display by

rotating the knob. When you are satisfied with the LED display image, press the knob to apply the settings.

Set the cabinet row and column quantities, horizontal offset, vertical offset and data flow of the cabinets

loaded by a single Ethernet port.

Step 1 Press the knob to enter the main menu screen.

www.novastar.tech

NovaPro UHD All-in-One Controller User Manual

Table of Contents