Network Settings - NovaStar NovaPro UHD User Manual

7.5.6 Network Settings

Set the device IP address and subnet mask. When the IP is changed, enter the new IP address into the
address bar to log in to the Web page again.
Note:
If the device is on the public network, do not change the IP address randomly.
7.5.7 HDR Settings
HDR is the acronym for High-Dynamic Range. HDR function can greatly enhance the display image quality,
allowing for a more clear and vivid image when the device is used together with the NovaStar A8s/A10s Plus
receiving cards.
Figure 7-28 HDR settings
Menu
Peak Screen Brightness
Ambient Brightness
Low Grayscale Mode
7.5.8 Low Latency
Low latency reduces the input source signal latency from input to output image of the NovaPro UHD. This
function can realize 2-frame delay from sending card to receiving card when the device is used together with
NovaStar Armor series receiving cards.
Select Low Latency to turn on this function.
www.novastar.tech
Description
Adjust the screen brightness under normal operation.
The value ranges from 100 to 10000, and defaults to 1000. Unit: Nit
Display the ambient brightness.
The value ranges from 0 to 200, and defaults to 30. Unit: Nit
Adjust the grayscale value of the screen image.
The value ranges from 0 to 50, and defaults to 15.
NovaPro UHD All-in-One Controller User Manual
86