Aux - NovaStar NovaPro UHD User Manual

Copy
Step 1 Perform the hardware connections for copy mode.
Figure 5-32 Connections for copy mode
Step 2 Go to Advanced Functions > OPT Mode > Copy to set the OPT mode as copy mode.

5.9.4 AUX

This function is used for auxiliary output of input sources, PVW or PGM. You can output the signal source to
the connected display device without any processing.
Menu
Status
Select AUX
AUX Scaling
Follow Preset
Note:
Capturing PVW or PGM will cause transient abnormal display of AUX output image. After the capturing is
completed, AUX displays normally.
www.novastar.tech
Description
Turn on or turn off the AUX function. The default option is Off.
Select a desired AUX signal source. The options are all input sources, PVW and PGM.
Set the AUX display mode.
 Full Screen: Display the image in full screen.
 Proportional: Scale the image proportionally and then display it on the screen.
Set whether the AUX follow the preset during switching.
 On: If there is AUX data in the preset, the AUX input source will be switched during
preset switching.
 Off: The AUX input source will not be switched during preset switching.
NovaPro UHD All-in-One Controller User Manual
27