Programming - NovaStar NovaPro UHD User Manual

7.3 Programming

Click Programming to enter the programming page where you can add, delete and edit layers, BKG, OSD
and LOGO files.
Figure 7-6 Programming
Table 7-1 Programming page descriptions
No. Description
1 All the function tabs
2 Shortcut keys




 Save Preset: Save the current layer layout and settings to a target preset for future use.
 Load Preset: Load a saved preset to the LED screen.
 Black: Make the output image go black.
 Freeze: Freeze the current frame of the output image.
3 Input source list and BKG/OSD/LOGO list
Input source status descriptions:
 Highlighted: The input source is accessed and normal.
 Not highlighted: The input source is not accessed or abnormal.
4 PVW area
www.novastar.tech
/ : Lock or unlock all the layers, BKG, OSD and LOGO files in the editing area.
: Clear all the added layers, BKG, OSD and LOGO files in the editing area.
: Restore the selected layer or all the layers to default size, that is, 800×600.
− Restore all layers
The layer with the lowest priority starts from the top left corner (starting point), and
every subsequent layer gets a 50-pixel offset both horizontally and vertically from its
previous layer.
− Restore the selected layer
Restore the selected layer to the top left corner.
: The snap function is enabled by default.
This function makes the layer snap to another layer edge or screen edge when it moves
close to another layer or the screen.
NovaPro UHD All-in-One Controller User Manual
60