Factory Reset; Firmware Update; Date And Time - NovaStar NovaPro UHD User Manual

USB Backup/Restore
Back up the data to a USB drive or restore the data from the USB drive.
Menu
USB Backup
USB Restore
Figure 5-35 USB backup/restore

Date and Time

Set the device date and time.
Menu
Date
Time
Change Date and Time
Self-Test

Device Parameter Self-Test: When problems occur on the device, you can use this function to
automatically diagnose the device and send the test result to device maintenance personnel to locate the
problems or check the device.

Export Logs: Export the device operation logs.

5.10.6 Factory Reset

Reset all the device settings to defaults.
Menu
Reset (Save IP)
Reset (All)

5.10.7 Firmware Update

Update the device firmware by using a USB drive.
Precondition: The update program must be stored in the root directory of the USB drive.

The system can automatically detect the update program in the USB drive and ask you whether to update
the firmware.

You can also go to Firmware Update > USB to update the firmware anytime you want.
www.novastar.tech
Description
Back up the following information to a USB drive, including the configured presets, PVW
and PGM data, LOGO, OSD, BKG, screen configuration, screen brightness, input
source color, color range information, AUX data, synchronization settings, hot backup
settings, output frame rate, HDR data, low latency settings, OPT mode, display control
information and communication settings.
Restore the backup files from the USB drive.
Description
Display the device date.
Display the device time.
Adjust the Year, Month, Day, Hour, Minute and Second values to change the
device date and time.
Description
Reset all the settings to defaults, but save the IP address.
Reset all the settings to defaults.
NovaPro UHD All-in-One Controller User Manual
30