Preset Settings - NovaStar NovaPro UHD User Manual

Parameter

Advanced
Under the Advanced tab, you can set the layer shape, layer flipping and copying.
− Shaped: Select a layer shape from the drop-down list.
− Flip:

Select Horizontally to flip the output image horizontally.

Select Vertically to flip the output image vertically.

Select both Horizontally and Vertically to flip the image both horizontally and vertically
− Copy: Add a new layer according to the copy mode you select.

None: Do not copy the layer.

Clone: Add a new layer which is the same as the original one. The two layers are symmetric
horizontally by default.

Left Mirror: Add a mirrored layer on the left of the original layer. The two layers display mirrored
images.

Right Mirror: Add a mirrored layer on the right of the original layer. The two layers display mirrored
images.

X: Set the horizontal initial coordinate of the new layer.

6.3.5 Preset Settings

Up to 16 presets are supported. The preset will be saved to the software automatically when you save it,
which is easier for future use.
Step 1 In the Preset area, click to select a preset.
Step 2 In the PVW area, add a layer and set its size and position.
Note:
The preset includes layer-related information, as well as BKG, LOGO and OSD settings.
Step 3 Click Save to save the layer settings to the preset.
: The preset with no data saved
: The preset with data saved
: The preset being edited currently
: The preset loaded currently

Select a saved preset, and click Load to load the preset to PVW.

Select a saved preset, and click Clear to clear the preset data.

Click Clear All to clear all the presets.
Note:
Double click a preset to rename it. Only the saved preset can be renamed.
If you hover on a preset icon, the preset name is displayed.
www.novastar.tech
Description
For example, if the original color is red (RGB: 255,0,0), the inverted color is cyan
(RGB: 0, 255, 255).
NovaPro UHD All-in-One Controller User Manual
49